Triumph Herald Chassis-- Built by Roland Jaggard

Frame

The model has no floor pan and therefore my model does tend to flap its wings a bit when being handled. Still at least it has the correct box section girders. The doors and rear wings contributed almost nothing to the stiffness. Nor did the Bonnet/front wing (Hood/wings) As Geoff Brown noted " I can certainly confirm that the stiffness of the overall assembly in torsion was poor! If you jacked up one corner the bonnet would get out of skew and any open door refuse to close properly! "

 
 
 

Browse Images

 
  <<Back || Next>>